90KW Air-Cooling Oil Inject Screw Compressor
Detalles del producto
90KW oil injected screw compressor
,air-cooling screw compressor
,industrial oil inject compressor
AIRERA 90kW Industrial-Grade Air-Cooled Oil-Injected Screw Air Compressor
The AIRERA 90kW Air-Cooled Series is the central powerhouse designed specifically for high-load, large-scale production environments. It not only delivers exceptional airflow volume but also utilizes industry-leading air-cooling technology to solve the common overheating issues faced by high-power units in demanding conditions. It is the ultimate reliable foundation for scaling up industrial automation.
The almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor. All the electronic components are brand products of leading manufacturers.
The amount of oil in the units is determined in such a way as to extend the oil change intervals (depending on ambient conditions). An oil level sensor is integrated as standard and is read by the controller. All the units in this series have a horizontal oil separation vessel in which the oil is separated from the compressed air highly efficiently at low speeds.
The centrepiece of the compressor is the air end, which is constructed and manufactured with the most modern production methods in Germany. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
| ITEM | UNIT | MODEL AGCD-90 |
|---|---|---|
| Free air delivery | m³/min | 17~12 |
| Max. working pressure | MPa | 0.7~1.3 |
| Compressor type | Oil inject screw compressor | |
| Cooling type | Air cooling | |
| Driven type | Direct driven | |
| Inlet status - Temperature | ℃ | ≤45 |
| Inlet status - Pressure | MPa | Atmospheric pressure |
| Inlet status - Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤79 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 2970 |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 |
| Cooling air flow | m³/hr | 11200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.77 ~ 1.43 |
| Lubricating oil volume | L | 70 |
| Compressed air outlet connection | G2 | |
| Dimension - L | mm | 1900 |
| Dimension - W | mm | 1250 |
| Dimension - H | mm | 1560 |
| Net Weight | kg | 1570 |
| Motor - Model | Y2280-2 | |
| Motor - Speed | rpm | 2970 |
| Motor - Rated Power | KW | 90 |
| Motor - Service factor | 1.2 | |
| Motor - Efficiency | IP55 | |
| Motor - Startup mode | Y-Δ starting | |
| Motor - Voltage | V | 380 (Special on request) |
| Motor - Frequency | Hz | 50 (Special on request) |
| Motor - Rated current | A | 166 |
| Motor - Weight of motor | kg | 566 |
Frequently Asked Questions-
Compresor de tornillo libre de aceite de 10 bar TUV ISO8573-1 Compresor de tornillo seco
AIRERA Compresor de tornillo sin aceite (seco) Sistema de compresión de aire 100% seco y libre de aceite Nuestros compresores de tornillo libres de aceite certificados ISO 8573-1 Clase 0 proporcionan aire comprimido puro y libre de contaminantes para aplicaciones que requieren los más altos est... -
CE TUV 375CFM-700CFM Motor diesel de aire comprimido motor diésel
Especificaciones: 1. El bloque de tornillo de una sola etapa está patentado; 2. Diseñado para una presión máxima de 40 bar; 3, motores Deutz y Yuchai mundialmente conocidos 4, rodamientos SKF, transmisión directa, engranajes sin ruido; Ampliamente utilizado en minas, conservación de agua, transporte, construcción naval. -
AGSD-C Compresor de aire general montado en el tanque 220V-460V
. Diseño de extremo de aire en Alemania 2. Doble tornillo con bajo nivel de ruido, carcasa súper silenciada 3. Diseño compacto y elegante. Puerta de acceso completamente abierta a las piezas internas para facilitar el servicio. 4. Funcionamiento 100% continuo. Operación con carga/sin carga 5. GS, certificado CE eléctrico industrial -
Compresor de tornillo de dos etapas de 200 kW 220V 380V 415V Compresor de tornillo de dos etapas
AIRERA AGCD-200D Un Compresor de Aire de Tornillo con Diseño de 2 Etapas El AIRERA AGCD-200D Un Compresor de Aire de Tornillo Industrial está diseñado para entregar aire comprimido potente, estable y energéticamente eficiente para operaciones industriales a gran escala. Construido con componentes de ...
