Willkommen bei Shanghai Bestcomp Compressor Co., Ltd

55KW 7.8~10.5m3/min Oil Inject Screw Compressor

Grundlegende Eigenschaften
Herkunftsort: In China hergestellt
Markenbezeichnung: AIRERA
Zertifizierung: ISO、CE、TUV
Modellnummer: AGCD-55D C
Immobilienhandel
Mindestbestellmenge: 1 Einheit
Preis: negotiable
Zahlungsbedingungen: TT/LC, Western Union, D/P, D/A
Lieferfähigkeit: 2.000-3.000 pro Monat
Produktübersicht
Der AIRERA 55 kW Öleingespritzte Schraubenkompressor liefert 7,8–10,5 m³/min mit einem in Deutschland entwickelten Luftende. Verfügt über eine intelligente Steuerung, einen Ölgehalt von ≤2 ppm und eine robuste Kühlung für den 24/7-Betrieb in medizinischen, pharmazeutischen und lebensmittelverarbeitenden Anwendungen.

Produktdetails

Hervorheben:

55KW oil injected screw compressor

,

7.8~10.5m3/min screw compressor

,

oil inject screw compressor with warranty

Cooling Air Flow(m3/Hr): 10200
Application: Medizin, Pharmazie, Lebensmittelverarbeitung
Oil Content: Öl einspritzen
Working Pressure: 0,7–1,3 bar
Cooling Type: Luftkühlung
Driven Type: Direktantrieb
Free Air Delivery: 7,8~10,5 m3/min
Produktbeschreibung
AIRERA 55kW Industrial High-Efficiency Oil-Injected Screw Air Compressor

The AIRERA 55kW Series Air Compressor is a premier power source engineered specifically for industrial production demands that prioritize high stability and superior energy efficiency.By perfectly integrating a robust air delivery range of 7.8–10.5 m³/min with advanced intelligent control technology, this series ensures seamless, 24/7 continuous operation for your production lines while significantly optimizing corporate energy costs.

Key System Advantages
Drives and electrics

The almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor. All the electronic components are brand products of leading manufacturers.


55KW 7.8~10.5m3/min Oil Inject Screw Compressor 0

Oil circuit

The amount of oil in the units is determined in such a way as to extend the oil change intervals (depending on ambient conditions). An oil level sensor is integrated as standard and is read by the controller. All the units in this series have a horizontal oil separation vessel in which the oil is separated from the compressed air highly efficiently at low speeds.


55KW 7.8~10.5m3/min Oil Inject Screw Compressor 1



Air end block – reliable centrepiece – Design in Germany

The centrepiece of the compressor is the air end, which is constructed and manufactured with the most modern production methods in Germany. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.

55KW 7.8~10.5m3/min Oil Inject Screw Compressor 2
Technical Specifications - 55kW Air Cooling Compressor
ITEM UNIT MODEL AGCD-55
Free air delivery m³/min 10.5~7.8
Max. working pressure MPa 0.7~1.3
Compressor type
Oil inject screw compressor
Cooling type
Air cooling
Driven type
Direct driven
Inlet status - Temperature ≤45
Inlet status - Pressure MPa Atmospheric pressure
Inlet status - Relative humidity
≤90%
Noise Level dB(A) ≤76
Residual oil content ppm ≤2
Drive rotor speed rpm 2970
Compressed air outlet temperature Ambient temperature+10
Cooling air flow m³/hr 10200
Control mode
Intelligent controller
Safety valve set pressure MPa 0.77 ~ 1.43
Lubricating oil volume L 50
Compressed air outlet connection
G2
Dimension - L mm 1900
Dimension - W mm 1250
Dimension - H mm 1560
Net Weight kg 1200
Motor - Model
Y2225M-2
Motor - Speed rpm 2970
Motor - Rated Power KW 55
Motor - Service factor
1.2
Motor - Efficiency
IP55
Motor - Startup mode
Y-Δ starting
Motor - Voltage V 380 (Special on request)
Motor - Frequency Hz 50 (Special on request)
Motor - Rated current A 103
Motor - Weight of motor kg 387
55KW 7.8~10.5m3/min Oil Inject Screw Compressor 3Frequently Asked Questions
Q1: The airflow range is 7.8–10.5 m³/min. How do I choose the right specifications?
A: Airflow depends on your required working pressure. At 1.3 MPa (10 bar), the output is approx 7.8 m³/min; at 0.7 MPa (7 bar), it reaches 10.5 m³/min. AIRERA’s smart controller allows fine-tuning to balance pressure and volume perfectly for your needs.
Q2: Why is AIRERA’s cooling system superior for high-temperature environments?
A: Many compressors trip at 40°C. AIRERA features oversized aluminum coolers and high-efficiency independent fans. Our smart thermal control ensures the oil remains at the optimal temperature even in extreme summer heat, preventing high-temperature shutdowns.
Verwandte Produkte
  • 10Bar ölfreier Schraubenkompressor TUV ISO8573-1 Trockenschraubenkompressor

    AIRERA Ölfreier (Trocken-) Schraubenkompressor 100% ölfreies Kompressorsystem für trockene Luft Unsere ölfreien Schraubenkompressoren nach ISO 8573-1 Klasse 0 liefern reine, schadstofffreie Druckluft für Anwendungen, die höchste Luftqualitätsstandards erfordern. Nach ISO 8573-1 Klasse 0 zertifiziert...
  • CE TUV 375CFM-700CFM Dieselbetriebener Luftkompressor Dieselmotor

    Spezifikationen: 1, Einstufiger Schraubenblock ist patentiert;, 2, Ausgelegt für einen maximalen Druck von 40 bar; 3, Deutz und Yuchai Weltbekannte Motoren 4, SKF-Lager, Direktantrieb, geräuschlose Getriebe; weit verbreitet in Bergwerken, Wasserschutz, Transportwesen und Schiffbau
  • AGSD-C allgemeiner auf Tank montierter Luftkompressor 220V-460V

    . Luftenddesign in Deutschland 2. Doppelschnecke mit geräuscharmem, superschallgedämpftem Gehäuse 3. Elegantes, kompaktes Design. Vollständig geöffnete Zugangstür zu den Innenteilen für einfache Wartung. 4. 100 % Dauerbetrieb. Last-/Leerlaufbetrieb 5. GS, CE-Zertifikat für Industrieelektrik
  • 200kW 2-stufiger Schraubkompressor 220V 380V 415V Doppelstufiger Schraubkompressor

    AIRERA AGCD-200D Schraubluftkompressor mit 2-stufiger Konstruktion DieAIRERA AGCD-200D Ein industrieller Schraubluftkompressorist so konzipiert, dass es leistungsfähige, stabile und energieeffiziente Druckluft für große Industriebetriebe liefert.Dieser 200-kW-Kompressor gewährleistet eine zuverl...

Anfrage senden