IP55-Rated 37 kW Two-Stage Oil-Injected Air Compressor | Designed for Stable Operation in High-Temperature Environments
Product Details
IP55-rated 37 kW air compressor
,two-stage oil-injected screw compressor
,high-temperature stable air compressor
The AIRERA 37 kW two-stage oil-injected screw air compressor is purpose-built to tackle the most demanding, heavy-duty industrial environments. Integrating cutting-edge two-stage compression technology, this unit delivers exceptional energy efficiency alongside a powerful, high-volume air output. Certified with a rugged IP55 protection rating, it effectively repels heavy dust and moisture. Combined with its superior high-temperature cooling design, the compressor guarantees reliable, stable, 24/7 continuous operation even under scorching heat and harsh ambient conditions. It serves as the ultimate power core for factories aiming for green energy savings and high productivity.
-
Efficient after cooler
The cooler adopts a new type of threaded finned tube shell-and-tube heat exchanger, and the compressed air goes inside the tube. The advantages are as follows: a. The compressed air goes through the tube, which improves the pressure bearing capacity compared with the outer finned tube.
-
Expanded filtering system design
Multiple air filter designs, more durable and stop much more particles outside, protect inlet system of compressor for long time working outdoor & indoor environment.
- Independent air intake system
Independent air intake ensures that the intake air temperature is equal to the ambient temperature. Large-capacity air filter is used to achieve better filtering effect, lower intake pressure loss, and energy saving and high efficiency. Maintenance and replacement are more convenient.
| ITEM | UNIT | MODEL AGCD-37II VP |
|---|---|---|
| Air capacity | m³/min | 2.75`6.88|2.73-6.82|2.3`5.74|2.22`5.55 |
| Working pressure | MPa | 0.7~1.3 |
| Compressor type | Oil inject dual stage screw compressor | |
| Cooling type |
Air cooling |
|
| Driven type | Direct driven | |
| Inlet status Temperature | ℃ | ≤45 |
| Inlet status Pressure | MPa | Atmospheric pressure |
| Inlet status Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤72 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 1500 |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 |
| Cooling air flow | m3/hr | 9200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.77-1.43 |
| Lubricating oil volume | L | 30 |
| Lubricating oil brand | ROTORCOMP | |
| Compressed air outlet connection | G1-1/2 | |
| Dimension L | mm | 1400 |
| Dimension W | mm | 1000 |
| Dimension H | mm | 1300 |
| Net Weight | kg | 785 |
| Motor Model | YPM-180L1-8 | |
| Motor Speed | rpm | 1500 |
| Motor Rated Power | KW | 37 |
| Motor Service factor | 1.2 | |
| Motor Protection type | IP55 | |
| Motor Efficiency | IE3 | |
| Motor Startup mode | Frequency conversion starting | |
| Motor Voltage | V | 380(Special on request) |
| Motor Frequency | Hz | 80-200 |
| Motor Rated current | A | 69.8 |
| Motor Weight of motor | kg | 250 |
The 37kW capacity serves as a vital power hub for medium-to-large workshops. AIRERA’s two-stage airend incorporates inter-stage cooling during the compression cycle, bringing the process closer to highly efficient "isothermal compression." Compared to a single-stage screw compressor of the same power, it delivers higher airflow with lower shaft power. This significantly reduces the specific power per cubic meter of compressed air, helping energy-intensive industries achieve their carbon reduction and energy-saving targets.
Both our electrical control cabinet and the main motor strictly comply with the fully enclosed IP55 protection standard. Fitted with high-quality sealing strips and heavy-duty dust filters, it completely blocks metal shavings, airborne dust, and moisture mist from entering critical circuits. This drastically reduces electrical failure rates caused by dust accumulation on contactors or component short circuits, significantly extending the machine’s operational lifespan in harsh industrial setups.
-
10Bar Oil Free Screw Compressor TUV ISO8573-1 Dry Screw Compressor
AIRERA Oil-free (dry) Screw Compressor 100% Dry Oil-Free Air Compressor System Our ISO 8573-1 Class 0 certified oil-free screw compressors deliver pure, contaminant-free compressed air for applications requiring the highest air quality standards. ISO 8573-1 Class 0 certified oil-free performance ... -
375CFM-780CFM at 300psi-500psi Diesel engine Powered portable Air Compressor,screw compressor
pecifications: 1, Single-stage screw block is patented;, 2,Designed for a maximum pressure of 40 bar; 3, Deutz, and Yuchai World well-known engines 4,SKF bearings,direct drive, no noise gears; widely used in mines, water conservancy, transportation, shipbuilding -
7.5hp-50hp AGSD-C Tank Mounted Air Compressor 220V-460V/50-60hz
. Air end design in germany 2. Double Screw with low noise, Super Silenced Enclosure 3. Elegant compact design. Fully open access door to inner parts for easy service. 4. 100% Continuous duty operation. Load/No Load operation 5. GS, CE Certificate industrial electric -
200kW 2 Stage Screw Compressor 220V 380V 415V Double Stage Screw Compressor
AIRERA AGCD-200 II D A Screw Air Compressor with 2-Stage Design The AIRERA AGCD-200D A Industrial Screw Air Compressor is engineered to deliver powerful, stable, and energy-efficient compressed air for large-scale industrial operations. Built with industrial-grade components and advanced compression ...
