160 kW Screw Air Compressor | Two-stage compression + IE3 energy efficiency—the top choice for industrial air applications
제품 세부정보
160 kW screw air compressor industrial
,two-stage compression screw air compressor
,IE3 energy efficiency screw compressor
The AIRERA 160 kW two-stage screw air compressor is a flagship, plant-wide power hub engineered exclusively for massive industrial parks and global manufacturing bases. Tasked with supporting immense and non-negotiable continuous air clusters, this model relies on its premium two-stage rotor design to seamlessly resolve the energy conflict between high discharge volumes and high-pressure conditions, achieving a monumental leap in efficiency.
Integrated with a custom, heavy-duty IE3 ultimate-efficiency motor, it secures a torrential, 24/7 air supply while driving the facility's comprehensive power consumption to an absolute minimum. Its rugged steel architecture and extreme thermal-stress resistance ensure rock-solid stability under non-stop, heavy-duty loads—making it the definitive asset for large enterprises to optimize energy structures and achieve scale-driven green manufacturing.
-
Silent centrifugal fan
Adopts the advanced centrifugal fan, which has large cooling air volume, low noise, stable and uniform air pressure, which makes full use of the heat dissipation area of the cooler, and greatly reduces the noise of the air compressor by 6-8dB.
-
Efficient after cooler
The cooler adopts a new type of threaded finned tube shell-and-tube heat exchanger, and the compressed air goes inside the tube. The advantages are as follows: a. The compressed air goes through the tube, which improves the pressure bearing capacity compared with the outer finned tube.
- Independent air intake system
Independent air intake ensures that the intake air temperature is equal to the ambient temperature. Large-capacity air filter is used to achieve better filtering effect, lower intake pressure loss, and energy saving and high efficiency. Maintenance and replacement are more convenient.
| ITEM | UNIT | MODEL AGCD-160II VP |
|---|---|---|
| Air capacity | m³/min | 13.12-32.80|12.60-31.50|11.52-28.80|10.56-26.40 |
| Working pressure | MPa | 0.7~1.3 |
| Compressor type | Oil inject dual stage screw compressor | |
| Cooling type |
Air cooling |
|
| Driven type | Direct driven | |
| Inlet status Temperature | ℃ | ≤45 |
| Inlet status Pressure | MPa | Atmospheric pressure |
| Inlet status Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤79 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 1500 |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 |
| Cooling air flow | m3/hr | 16200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.77-1.43 |
| Lubricating oil volume | L | 70 |
| Lubricating oil brand | ROTORCOMP | |
| Compressed air outlet connection | G2-1/2 | |
| Dimension L | mm | 2540 |
| Dimension W | mm | 1640 |
| Dimension H | mm | 1800 |
| Net Weight | kg | 2400 |
| Motor Model | YPM-290L1-9 | |
| Motor Speed | rpm | 1500 |
| Motor Rated Power | KW | 160 |
| Motor Service factor | 1.2 | |
| Motor Protection type | IP55 | |
| Motor Efficiency | IE3 | |
| Motor Startup mode | Frequency conversion starting | |
| Motor Voltage | V | 380(Special on request) |
| Motor Frequency | Hz | 80-200 |
| Motor Rated current | A | 292 |
| Motor Weight of motor | kg | 1085 |
The AIRERA 160 kW model features an industrial-grade intelligent group control communication interface. When multiple units are connected in parallel to form a central air station, the system utilizes advanced control algorithms to smartly coordinate the start, stop, and load of each 160 kW unit based on real-time pressure fluctuations in the main plant network. Paired with the premium base efficiency of its two-stage compression and IE3 motor, the group control ensures the entire air station always operates on the optimal energy efficiency curve, avoiding energy waste caused by frequent unloading of large machines.
The AIRERA 160 kW model is equipped with a highly advanced internal multi-stage oil-gas separation system. Thanks to the low discharge temperature of two-stage compression, the lubricating oil is less prone to vaporization, resulting in more thorough physical separation during the primary stage. Moving through high-precision oil separator elements, the residual oil content in the final discharged compressed air is kept at an absolute minimum. This not only extends the lifespan of downstream precision filtration and drying equipment but also provides a stable, pure, and uninterrupted quality air supply for automated production lines plant-wide.
-
10바 오일 프리 스크류 컴프레서 TUV ISO8573-1 건식 스크류 컴프레서
AIRERA 기름 없는 (干) 나사 압축기 100% 건조 기름 없는 공기 압축기 시스템 우리의 ISO 8573-1 클래스 0 인증을 받은 기름 없는 나사 압축기는 가장 높은 공기 품질 기준을 요구하는 애플리케이션에 순수하고 오염 물질이 없는 압축 공기를 제공합니다. ISO 8573-1 0급 인증 기름 없는 성능 독일에서 제조 된 프리미엄 GHH 기름 없는 공기 끝 에너지 효율을 높이기 위한 독보적인 설계 100% 순수한 기름 없는 공기 공급 시스템 오염물질이 없는 배출 공기를 필요로 하는 프로젝트에 이상적입니다. 인증서:ISO, T... -
375CFM-780CFM 300psi-500psi 디젤 엔진 가동 휴대용 공기 압축기,스크루 압축기
사양: 1, 단일 단계 스크류 블록이 특허를 받았습니다., 2, 최대 압력 40 bar에 맞게 설계되었습니다. 3, Deutz 및 Yuchai 세계적으로 유명한 엔진 4, SKF 베어링, 직접 구동, 소음 기어 없음; 광산, 수자원 보존, 운송, 조선에 널리 사용됩니다. -
7.5hp-50hp AGSD-C 탱크 장착 공기 압축기 220V-460V/50-60hz
. 독일의 에어 엔드 디자인 2. 저소음 이중 나사, 초저소음 인클로저 3. 우아하고 컴팩트한 디자인. 손쉬운 서비스를 위해 내부 부품에 대한 완전 개방형 액세스 도어. 4. 100% 연속 사용 작동. 부하/무부하 운전 5. GS, CE 인증 산업용 전기 -
200kW 2 단계 나사 압축기 220V 380V 415V 이중 단계 나사 압축기
AIRERA AGCD-200 II D 2단계 설계의 나사 공기 압축기 의AIRERA AGCD-200D 산업용 나사 공기 압축기대규모 산업용 압축공기를 공급할 수 있도록 설계되었습니다. 산업용 부품과 첨단 압축 기술로 제작되었습니다.이 200kW 압축기는 지속적인 작동을 요구하는 까다로운 환경에서도 신뢰할 수있는 성능을 보장합니다.. 최적화된 설계로 공기 흐름 효율을 높이고 에너지 소비를 줄이고 정지 시간을 최소화합니다. 제조업체가 생산성을 향상시키고 운영 비용을 낮추는 데 도움이 됩니다.AGCD-200II D A는 압축 공기 솔루션...
