High-Capacity AGCD-355D II B VP Screw Air Compressor for Mining Applications—High-Pressure Two-Stage Compression Air Pump
製品詳細
High-Capacity 2 Stage Screw Compressor
,Mining Air Compressor High-Pressure
,Two-Stage Compression Air Pump
The AIRERA AGCD-355D II B VP screw air compressor is an ultra-high-capacity, heavy-duty technical marvel specifically engineered for mega-scale mining excavations and heavy engineering operations. Seamlessly integrating an industry-leading high-pressure two-stage compression airend with a high-capacity smart VSD system, this model delivers a continuous, powerful supply of constant-pressure compressed air even under extreme environments characterized by heavy mining dust, power grid fluctuations, and non-stop heavy workloads. Its reinforced, integrated, fully-enclosed chassis serves as a premium barrier against vibrations, explosions, and high temperatures, completely replacing inefficient legacy pumps prone to frequent breakdowns in harsh conditions to serve as a rigid core backbone for modern mining enterprises to safeguard 24/7 continuous production and maximize industrial asset value.
-
Silent centrifugal fan
Adopts the advanced centrifugal fan, which has large cooling air volume, low noise, stable and uniform air pressure, which makes full use of the heat dissipation area of the cooler, and greatly reduces the noise of the air compressor by 6-8dB.
-
Noise reduction sheet metal design
Multiple noise reduction designs, calculated according to noise science, with special flame-retardant and sound-absorbing cotton inside to reduce unit noise.
- Independent air intake system
Independent air intake ensures that the intake air temperature is equal to the ambient temperature. Large-capacity air filter is used to achieve better filtering effect, lower intake pressure loss, and energy saving and high efficiency. Maintenance and replacement are more convenient.
| ITEM | UNIT | MODEL AGCD-355II VP |
|---|---|---|
| Air capacity | m³/min | 29.16-72.90|29.04-72.60|24.36-60.90|21.99-54.98 |
| Working pressure | MPa | 0.7~1.3 |
| Compressor type | Oil inject dual stage screw compressor | |
| Cooling type |
Air cooling |
|
| Driven type | Direct driven | |
| Inlet status Temperature | ℃ | ≤45 |
| Inlet status Pressure | MPa | Atmospheric pressure |
| Inlet status Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤79 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 1500 |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 |
| Cooling air flow | m3/hr | 24200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.77-1.43 |
| Lubricating oil volume | L | 160 |
| Lubricating oil brand | ROTORCOMP | |
| Compressed air outlet connection | DN150 | |
| Dimension L | mm | 3450 |
| Dimension W | mm | 2000 |
| Dimension H | mm | 2200 |
| Net Weight | kg | 8500 |
| Motor Model | YPM-400L1-8 | |
| Motor Speed | rpm | 1500 |
| Motor Rated Power | KW | 355 |
| Motor Service factor | 1.2 | |
| Motor Protection type | IP55 | |
| Motor Efficiency | IE3 | |
| Motor Startup mode | Frequency conversion starting | |
| Motor Voltage | V | 380(Special on request) |
| Motor Frequency | Hz | 80-200 |
| Motor Rated current | A | 635 |
| Motor Weight of motor | kg | 2250 |
This heavy-duty model splits the extremely high-output high-pressure compression task into two separate stages, drastically lowering the pressure ratio per stage to fundamentally eliminate internal air backflow and severe thermal energy losses common under high-pressure operations. Relying on a smart VSD regulation grid designed specifically for heavy mining applications, the unit perfectly matches the high-frequency, large-flow air pulses of drilling rigs, ensuring discharge pressure remains rock-solid and constant to safeguard the high-efficiency continuous operations of mega-mine excavation lines 24/7 with surging power.
This equipment introduces an advanced heavy-duty smart VSD control network, capturing severe fluctuations in actual mining operational loads within milliseconds to adjust motor power dynamically, completely smashing the staggering power waste caused by the frequent idling of conventional mining pumps during non-drilling periods. Along with the exceptionally low rotational speed and ultra-light main shaft axial stress brought by two-stage compression technology, wear on core drive components is drastically reduced, which not only grants fixed assets an extremely long service life but also helps financial departments significantly drive down the comprehensive operational cost per ton of ore by minimizing routine maintenance frequency.
-
10Bar オイルフリースクリューコンプレッサー TUV ISO8573-1 ドライスクリューコンプレッサー
AIRERA オイルフリー (乾燥) スクロールコンプレッサー 100%ドライオイルフリー空気圧縮機システム ISO 8573-1 クラス0 認定の 油のないスクリューコンプレッサーは 最高の空気の品質基準を必要とするアプリケーションのために 純粋で汚染物質のない圧縮空気を供給します ISO 8573-1 クラス0 認証された無油性能 ドイツで製造されたプレミアムGHH無油空気端 エネルギー効率の向上のための特許特有の設計 100%純無油空気配送システム 汚染物質のない放出空気を必要とするプロジェクトに最適 認証:ISO,TÜV,CE認証による品質保証と適合性... -
375CFM-780CFM 300psi-500psi ディーゼルエンジン 携帯型エアコンプレッサー,スクリューコンプレッサー
仕様: 1、一段スクリューブロックは特許取得済み;、2、最大圧力 40 bar 向けに設計。 3、Deutz、Yuchai の世界的に有名なエンジン 4、SKF ベアリング、ダイレクトドライブ、ノイズギアなし。鉱山、水利、輸送、造船で広く使用されています -
7.5hp-50hp AGSD-C タンク搭載エアコンプレッサー 220V-460V/50-60hz
。ドイツのエアエンド設計 2. 低騒音のダブルスクリュー、スーパーサイレントエンクロージャ 3. エレガントなコンパクトデザイン。内部部品へのアクセスドアを完全に開くと、メンテナンスが容易になります。 4. 100% 連続稼働。負荷/無負荷動作 5. GS、CE 証明書産業用電気 -
200kW 2段階スクリューコンプレッサー 220V 380V 415V 2段階スクリューコンプレッサー
AIRERA AGCD-200 II D A スクリューエアコンプレッサー 2段式 このAIRERA AGCD-200D A 工業用スクリューエアコンプレッサーは、大規模な産業操業向けに強力で安定したエネルギー効率の高い圧縮空気を供給するように設計されています。産業グレードのコンポーネントと高度な圧縮技術で構築されたこの200kWコンプレッサーは、連続運転が必要な要求の厳しい環境でも信頼性の高いパフォーマンスを保証します。 最適化された設計により、エアフロー効率が向上し、エネルギー消費が削減され、ダウンタイムが最小限に抑えられます。これにより、製造業者は生産性を向上させながら運用コストを削減で...
